AUTE - 4090U - Autonomous Vehicles

2022-2023 - UG - Course Change

completed

What can I do next?

View the Proposal

  • View changes to the proposal by clicking the Discussion tab and selecting "Show current with markup" on the User Tracking dropdown.
  • View current comments concerning this proposal by clicking the Discussion tab.
  • View the history of the proposal by clicking the Workflow Status tab.
  • View the signatures the proposal has collected by clicking the Signatures tab.
  • View the files associated with the proposal by clicking the Files tab.
  • Compare the proposal with related proposal by clicking the Proposal Lookup tab.
(A) Proposal summary
Next
  • STEP 1 - Complete the proposal summary information
  • Home faculty*
    Choose your faculty from the list of available options.
  • Course changes*
    Select all course changes that apply.

  • If you selected 'other' from the checklist, please describe the change below and include any additional supporting information in Step 2.

  • Other changes
    Describe any changes not covered in the checklist above.
  • Is this course change associated with a program proposal?*
    If this course change goes with a Minor Program Adjustment, Major Program Modification or other program-related proposal, select 'yes'.
  • Reason for change and ways in which it maintains/enhances course/program objectives*

    With the removal of MECE 3390U: Mechatronics and the addition of AUTE 3500U: Automotive Instrumentation and Controls to the Automotive Engineering program and its corresponding Engineering and Management program, there is a requirement to update the prerequisites to AUTE 4090U to reflect these changes.

    Describe the reason for change and ways in which it maintains and/or enhances course and/or program objectives.
  • Financial implications*

    None

    Include an analysis of any financial implications. If none, please type N/A.
  • Calendar start date*
    Choose when the change should first appear in the Academic Calendar (e.g., Fall 2021).
  • Registration start date*
    Choose when the change should first be active for registration in the Academic Calendar (e.g., Fall 2021).
  • STEP 2 - Include additional supporting information, if applicable

  • Visit the files section of the toolbox on the right-hand side of the form to attach any supporting documentation.

  • Are you attaching any supporting documents?*
  • Additional supporting information, if applicable
    Describe any additional information needed to support the proposal.
(B) Course information
Next
  • STEP 3 - Complete course changes

  • Note: If you are changing the course subject code or course number for this course, please verify that the course code has not been previously used.

  • Course subject code*
    Any new subject codes must be verified by the Office of the Registrar. If you do not see a verified subject code listed, please contact ciqe@ontariotechu.ca.
    Course number*
    4090U
    4090U
    Course numbers must consist of a four digit numeric code and an alphabetic identifier. Normally, the alphabetic identifier distinguishes the course level, or the source delivery, where U represents undergraduate courses and G represents graduate courses. New course numbers must be verified by the Office of the Registrar.
  • Course title (long form)*
    Autonomous Vehicles
    Autonomous Vehicles
    Titles should reflect the educational content of the course. The long form course title is displayed in the Academic Calendar and should conform to the university's Editorial Style Guide. Contact ciqe@ontariotechu.ca for assistance.
  • Course title (short form)
    Autonomous Vehicles
    Autonomous Vehicles
    The short form course title is used for MyCampus and student transcripts. Titles should reflect the educational content of the course. Short form course titles are limited to 30 characters.
  • Subject area
    The subject area is used to filter courses in the Academic Calendar. If you do not see an appropriate subject area listed, please contact ciqe@ontariotechu.ca.
  • Course description

    This course provides an overview of autonomous vehicles. The overall architecture of autonomous driving systems, the various levels of autonomous driving technologies, and the state‐of‐the‐art of autonomous driving technologies will be discussed. Topics covered include: advanced driver assist systems and active vehicle safety systems; sensors and sensor fusion; computer vision basics and deep learning for perception; localization and mapping; vehicle‐to‐vehicle and vehicle‐to‐everything communication technologies; navigation and vehicle control; and system reliability, stability, and limitations.

    The course description should be a brief summary of the course content and should conform to the university's Editorial Style Guide as it is visible in the Academic Calendar. Contact ciqe@ontariotechu.ca for assistance.
  • Credit hours
    3
    3
    A measure used to reflect the relative weight of a given course toward the fulfillment of degree requirements. Unless otherwise indicated, a course normally has a credit hour value of three.
  • Lecture hours
    3
    3
    The number of contact hours offered in lecture format. Note that each contact hour may consist of a variety of instructional methods. Instructional methods are not listed in the Academic Calendar.
    Lab hours
    The number of contact hours offered in lab format. Note that each contact hour may consist of a variety of instructional methods. Instructional methods are not listed in the Academic Calendar.
  • Tutorial hours
    1
    1
    The number of contact hours offered in tutorial format. Note that each contact hour may consist of a variety of instructional methods. Instructional methods are not listed in the Academic Calendar.
    Other hours
    The number of contact hours offered in another format not covered here (e.g., 7 practicum hours). Note that each contact hour may consist of a variety of instructional methods. Instructional methods are not listed in the Academic Calendar.
  • Cross-listing(s)
    The practice of offering a single course under two different course codes.
  • Prerequisite(s) and Prerequisite(s) for Banner

     or AUTE 3500U) and  

    A course that must be successfully completed prior to commencing a second course for which it is required. Note that this field will be visible in the calendar and cannot contain strings of text (e.g., upper-year Science courses) or special characters. Please include strings of text in the 'additional course restrictions' field. Use ‘and’ or ‘or’ to separate courses and use brackets for groups, e.g., (BUSI 2170U and BUSI 2202U) or (BUSI 2205U or BUSI 2210U).
  • Corequisite(s)
    A course that must be taken concurrently with the course for which it is required. If the course can be taken at a previous time, please see Prerequisite with Concurrency.
  • Prerequisite(s) with concurrency (pre or co-requisite)
    A prerequisite with concurrency (i.e., a course that may be taken either in advance of or at the same time as the course for which it is required). Use ‘and’ or ‘or’ to separate courses and use brackets for groups.
  • Credit restriction(s)
    This section is for instances where two or more courses are not equivalent, therefore a student is not eligible to receive credit for both towards their program. Students are restricted from registering in these credit restricted courses.
  • Credit restriction(s) - Equivalent course(s)
    Two courses are similar enough in content that they are considered equivalent so students can register in either course but they will only receive credit for one course in their program.
  • Recommended
    A recommended but not required prerequisite course. Use ‘and’ or ‘or’ to separate courses and use brackets for groups. Recommended prerequisites will not be added to Banner.
  • Course restrictions
    Any restriction that is required for a course (e.g., Must be registered in Year 4).

  • Please note that the following fields may not import from the calendar. If you are making changes to one or more of these fields, please enter the current information now and make changes only after you have validated and launched the proposal.

  • Course type
  • Course type
  • Is the course undergraduate or professional?
    E.g., some Education courses are classified as professional.
  • Grade mode
  • Grade mode
    Identifies the method of grading applied to the course.
  • Course instructional method
  • CLS (in-class delivery)
    HYB (in-class and online delivery)
  • IND (individual studies)
    OFF (off-site)
  • WB1 (virtual meet time - synchronous)
    WEB (fully online - asynchronous)
  • N/A (not applicable)
  • Teaching and assessment methods
  • Teaching and assessment methods

    Assignments, midterms, project, and final exam as determined by the instructor.
    Learning

    An exhaustive list of every possible way of administering and/or assessing the course in bulleted format.
  • Learning outcomes

  • For assistance with developing your course learning outcomes, please refer to the Teaching and Learning website or contact them at teachingandlearning@ontariotechu.ca

  • Course learning outcomes

    CEAB Graduate Attributes:

    Attributes Covered in this Course
    Knowledge Base IDA
    Investigation I
    Design I
    Program Analysis D
    Use of Engineering Tools D
    Impact of engineering of society and the environment I

    CEAB Course Content Breakdown:

    Math Basic Science Complementary Studies  Engineering Science  Engineering Design
    0% 0% 0% 100% 0%

    Upon successful completion of this course, the students should be able to:

    • Understand the underlying technologies used in autonomous vehicles
    • Explain the various levels of autonomous driving technologies
    • Undestand the current state‐of‐the‐art in autonomous vehicles
    • Apply the control algorithms to autonomous driving
    • Use appropriate engineering tools
    • Simulate a basic autonomous vehicle
    • Communicate their work effectively
    • Understand the social and economic impact of autonomous vehicles

  • If you updated the learning outcomes, please ensure the 'last updated' field below includes the current term.

  • Last updated
    Select the current term from the list of available options.
  • Experiential Learning
  • Does this course contain any experiential learning components?
    Only 'yes' values entered in this field will display in the Academic Calendar.

  • If the course DOES NOT contain any experiential learning components, then no further action is required in this section.  If the course DOES contain experiential learning components, please select 'Yes' above, then enter a 'Yes' or 'No' value for each of the experiential components below as appropriate.

  • Case study
    Simulated workplace project
  • Consulting project/workplace project
    Applied Research
  • Field experiences
    Other types of experiences (please describe below)
  • Other
(C) Impact and consultation
Next
  • STEP 4 - Run an impact report and complete Section C

  • Run an impact report by clicking on the report icon at the top of the form. Print the report to PDF and attach to the proposal in the files section of the toolbox to the right of the form. Review the impact report and consult with other areas, as required.

  • I have completed and attached an impact report for this course*
    By selecting 'yes', you agree that you have reviewed and attached the impact report.
  • Does this course change impact the Graduate Calendar?*
    The impact report will not highlight any impacts to courses or programs in the Graduate Calendar. Please take a moment to manually search the Graduate Academic Calendar for any impact that may need to be addressed.
  • We have consulted with all impacted areas*
    By selecting 'yes', you agree that you have consulted with all affected areas prior to beginning this proposal. Select 'N/A' only if the change(s) do not involve students, staff and faculty from other programs or courses.
  • Consultation*

    n/a

    Describe the consultation that took place with those impacted.
  • Indigenous Content and Consultation
  • Does this course contain any Indigenous content?*

  • For more information on how Indigenous content is defined at Ontario Tech University and how to consult with the Indigenous Education Advisory Circle, please refer to the Protocol for Consultation with the Indigenous Education Advisory Circle.

  • Has the IEAC been contacted?
  • If Yes, when?
  • What was the advice you received from the IEAC? And, how has it been included in your proposal?
  • Did the IEAC ask you to return the proposal to them for review?
    If Yes, have they completed their review?
(D) Routing
Next
  • STEP 5 - Enter routing information

  • Important note: it is imperative that you choose the correct routing path as it cannot be changed once a proposal has been launched. If you have made a routing error after launching the proposal, the proposal will be cancelled and a new proposal will be required. If you require assistance with routing, please contact ciqe@ontariotechu.ca.

  • Should this proposal be routed to the Program Approval step prior to Curriculum Committee?*
    If your curriculum committee is organized by program, or if program-level approval prior to curriculum committee is not required, select 'no'.
  • Faculty or program-level group*
    Choose your faculty or program-level group from the list of options. If your faculty has program-level committees, choose the corresponding program group from the list. Otherwise, choose the home faculty. You may choose more than one option, but please note that your proposal will go to the committees of all options selected. The proposal will not move on to the next step until all faculties have approved at their respective committees. Note: If you are making a change for a Bachelor of Engineering program in FESNS, you must select both the Faculty of Energy Systems and Nuclear Science, and the Faculty of Engineering and Applied Science from the list of options.
  • Is this change for a Bachelor of Engineering program?*
  • Are there departments associated with your faculty?*
(E) End of proposal
Next
  • STEP 6 - Save and ensure all required fields are complete
  • STEP 7 - Validate and launch proposal
  • STEP 8 - Review course changes

  • To view the proposal with mark-up, navigate to the discussion section of the toolbox on the right-hand side of the form and change the ‘User-Tracking’ setting to ‘Show current with mark-up’.

  • STEP 9 - Approve proposal

  • As the originator, you must approve the proposal to send it on to the next step. To approve, navigate to the decisions section of the toolbox on the right-hand side of the form.

CIQE use only
Next
  • Formerly
  • Status
  • Course OID
    98562
    98562

  • User Tracking

    Help: Show Original: This option displays the proposal as it appeared at launch. No markup will be visible on the form. There will be no differentiation between fields that contain imported content and content that was created or selected by the originator by hand.

    Help: Show Current: This option displays the proposal as it appears currently. No markup will be visible on the form. There will be no differentiation between fields that contain imported content and content that was created or selected by the originator by hand.

    Help: Show Current with Markup: This option displays the proposal with all of its current content marked to show different editors. Text fields that include imported content are indicated by a blue highlight, and may also include additional changes within, indicated by each editor’s unique color. Fields containing selects, checkboxes, radio buttons, or widgets (such as the curriculum) provide an activity log above the field, indicating each editor’s selection and unique color.

    Comments

    You have not saved your changes to all the assessment fields you edited. You have the following options:

    • Click "Save All Changes" now to save every change you made
    • Click "Abandon Changes" to destroy all unsaved changes
    • Click "Cancel" to continue working on assessments and save each field individually

    What would you like to do?

      You must be logged in, in order to approve.

      Please upload the form that you just printed and signed.

      This will be used as your signature to sign this proposal upon approval.


      Listed below are the symbols and colors utilized in Curriculum:

      • = has not made a decision
      • = approved
      • = rejected
      • = held
      • = suspended
      • = cancelled
      • = multiple decisions
      • = task
      • = mine
      • = stuck
      • = urgent, out of date import source